| Accuracy | ± 0.5% |
|---|---|
| Name | Masoneilan SVI FF |
| Repeatability | ± 0.3% Full Span |
| Conformity/Linearity | ± 0.5% Full Span |
| Supply Pressure Effect | 0.05% Per Psi Unit |
| Application | Low Emission Gland Packing |
|---|---|
| Basic Error | ±1% |
| Inherent Characteristics | Linear |
| Control Signal | 4-20 MA |
| Connections | Flanged |
| Input Signal | 4 To 20 MA DC Constant Current With 30 VDC |
|---|---|
| Supply Pressure | 0.3 Bar (5 Psi) Above Actuator Requirement |
| Supply Medium | Air Or Natural Gas |
| Independent Linearity | ±2 Percent Of Output Signal Span |
| Hysteresis | 0.6 Percent Of Span |
| Input Signal | 4 To 20 MA DC Constant Current With 30 VDC |
|---|---|
| Supply Pressure | 0.3 Bar (5 Psi) Above Actuator Requirement |
| Supply Medium | Air Or Natural Gas |
| Independent Linearity | ±2 Percent Of Output Signal Span |
| Hysteresis | 0.6 Percent Of Span |
| Conformity/Linearity | ± 0.5% Full Span |
|---|---|
| Supply Pressure Effect | 0.05% Per Psi Unit |
| Name | Masoneilan SVI FF |
| Operating | -40° F To 185° F (-40° C To 85° C) |
| Accuracy | ± 0.5% |
| Maximum Output Torque | 600 Nm |
|---|---|
| Ambient Temperature | -20℃ ~ +70℃ |
| Protection Level | IP66 |
| Communication Interface | HART, FOUNDATION Fieldbus, Profibus PA |
| Installation Method | Bracket Or Flange Installation |
| COMMUNICATION | HART® |
|---|---|
| CONTROL LOOP | 4 To 20 MA |
| Static Destruction Limit | 40 V, Internal Current Limit Approx. 40 MA |
| Model Number | 3730 |
| Operating Temperature | Standard Temperature, High Temperature |
| Sensitivity | ≤0.1 % |
|---|---|
| Hysteresis | ≤0.3 % |
| PRODUCT | Positioner |
| Valve Travel | 3.6 To 300 Mm |
| Direction Of Action | Reversible |
| Product Type | Valve Positioner |
|---|---|
| Application | Thermal Power Petrochemical Industry |
| Communication | Analog Signal Feedback |
| Supply Pressure | 0.14 To 0.7 MPa |
| Protection | Explosion Proof Type |
| Type | GX |
|---|---|
| Certified | CRN, CUTR, Fugitive Emissions, PED, SIL Compliance |
| Valve Size | NPS 1/2, NPS 3/4, NPS 1, NPS 1-1/2, NPS 2, NPS 3, NPS 4, NPS 6 |
| Flow Characteristic | Balance Percentage, Linearity, Characterization |
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy |