Send Message
Home > products > EPSON Robot Arm >
Scara Robot EPSON C8 8kg load for picking,welding and assembly

Scara Robot EPSON C8 8kg load for picking,welding and assembly

8kg Load Robotic Arm

6 Axis EPSON Robot Arm

IP67 Robotic Arm

Place of Origin:

China

Brand Name:

EPSON

Certification:

CE

Model Number:

C8

Contact Us

Request A Quote
Product Details
Product Name:
Scara Robot EPSON C8 8kg Load For Picking,welding And Assembly
Max Load:
8 Kg
Rated Load:
3 Kg
Arm Length:
791mm/711mm
Weight:
49 Kg (53kg IP67)
Temperature:
5- 40 Deg C
Robot Cable:
3M (Standard), 5m (Optional), 10m (Optional)
Software:
EPSON RC+ 7.0
Installation Type:
Table, Ceiling , Angle Installation
Braking:
All 6 Axes
Product Description

 


Epson C8 compact 6-axis robot

Scara Robot EPSON C8 8kg load for picking,welding and assembly 0

 

Based on the successful experience of C4 robot, Epson C8 robot maintains the key slim linear design and C4 robot's

high performance, high load and larger operating distance. It is suitable for different applications requiring high flexibility,

high speed and small floor area. Epson C8 compact 6-axis robot uses power driven servo technology to achieve the

high performance results expected by customers. In addition, using the advanced residual vibration technology, namely

Epson quartz micro electromechanical system, which can sense the angular velocity and feed it back to the servo motion

system, C8 robot can greatly reduce the vibration in the process of motion and start / stop The vibration makes the

movement more stable and the positioning faster.

 

High performance

 

  • Industry leading cycle time
  • Faster than SCARA
  • Load up to 8 kg while maintaining short cycle time
  • High repeat positioning accuracy, in line with customer expectations
  • Residual vibration technology ensures powerful movement and faster positioning

 

Advantages of slim linear design

 

  • The floor area is small to ensure the utilization rate of plant space
  • Light weight, easy for ceiling / sidewall installation and track / slide installation
  • Compact wrist provides leading fifth joint mobility
  • Excellent range of motion
  • Wide first joint (+ / - 240 degrees) working range(about 30% more than traditional 6-axis robot)
  • Suitable for loading / unloading in limited or narrow space

 

Leading edge controller and development software

 

  • Epson RC + software is at the forefront of the industry in terms of ease of use and saving development time
  • RC700-a controller provides high performance at low cost
  • Integration options optimize system performance and reduce total development time (see options page for more information)
  • High performance and fast processing power
  • Customers can use their own PC computer to connect with rc700 controller to get better meter at lower cost present

 

 


 

Model C8

Core specifications
Repeat positioning accuracy: +/-0.02mm
Load (kg): Max 8 / Rated 3
Cycle time: 0.31 sec(1Kg Load)
Weight: 49 kg (53kg IP67)
Arm length Horizontal working distance (to mounting surface): 791mm
Horizontal working distance (to wrist Center): 711mm
Other arm length configuration Installation type: Table, Ceiling
Clean type and Antistatic type: ISO 3 and Antistatic
Protection type: IP67 rated
Subscriber line Wire: 15 pin (D-sub connector)
Ethernet: 8-pin RJ45 (class 5 or equivalent)
Guide force connection: guide force connector 6 pin (Future)
Air: 2 (6mm)
Environmental applicability Temperature: 5- 40 ℃
Humidity: 10 - 80% (non condensing)
Safety standards CE
JIS B 8433
ANSI/RIA R15.06-1999
Mechanical instructions EN ISO 12100-1,EN ISO 12100-2,EN ISO 10218,
EN 60204-1,EN ISO 13849-1
EMC directive EN55011,EN61000-6-2
JIS B 8433-1
CE
In line with KC mark
RoHS directive,REACH
Available controllers RC700-A– PC driven high performance controller
RC700DU-A- multi robot control drive unit
Range of motion J1 (Steering): +/- 240°
J2 (Lower Arm): -158to +65°
J3 (Upper Arm): -61 to +202°
J4 (Wrist Roll): +/-200°
J5 (Wrist Bend): +/-135°
J6 (Wrist Twist): +/-360°
Motor Wattage J1: 1000 W
J2: 750 W
J3: 400 W
J4: 100 W
J5: 100 W
J6: 100 W
Allowable moment of inertia J4:0.47 kg•m2
J5:0.47 kg•m2
J4:0.15 kg•m2
Braking All 6 axes
Options Visual guidance (CV2 or PV1)
. Net support (Epson RC + 7.0 API)
Device network, Ethernet / IP, Fieldbus, EtherCAT, CC link
Belt tracking
GUI construction
Pressure sensing
Robot cable 3M (Standard), 5m (Optional), 10m (Optional)
Software EPSON RC+ 7.0

 

Send your inquiry directly to us

Privacy Policy China Good Quality Kuka Robot Arm Supplier. Copyright © 2019-2024 shgongboshi.com . All Rights Reserved.