| Type | GX | 
|---|---|
| Certified | CRN, CUTR, Fugitive Emissions, PED, SIL Compliance | 
| Valve Size | NPS 1/2, NPS 3/4, NPS 1, NPS 1-1/2, NPS 2, NPS 3, NPS 4, NPS 6 | 
| Flow Characteristic | Balance Percentage, Linearity, Characterization | 
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy | 
| Type | GX | 
|---|---|
| Certified | CRN, CUTR, Fugitive Emissions, PED, SIL Compliance | 
| Valve Size | NPS 1/2, NPS 3/4, NPS 1, NPS 1-1/2, NPS 2, NPS 3, NPS 4, NPS 6 | 
| Flow Characteristic | Balance Percentage, Linearity, Characterization | 
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy | 
| Type | EZ | 
|---|---|
| Certified | SIL Capable, Fugitive Emission, NACE | 
| Valve Size | NPS 1/2, NPS 3/4, NPS1, NPS 1-1/2, NPS 2, NPS 3, NPS 4 | 
| Flow Characteristic | Equal Percentage, Linear, Special Characterization, Quick Opening | 
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy | 
| Product Name | Fluke 700PTPK2 Pneumatic Test Pressure Kit | 
|---|---|
| Brand | Fluke | 
| Model | 700PTPK2 | 
| Seat, Main Valve | CTFE, Vespel SP21 | 
| Bonnet, Back-cap,Body | Brass, 303 Stainless Steel, 316 Stainless Steel | 
| Operative Temperature Limits | -40 To 82℃ | 
|---|---|
| Model Number | DVC6200 | 
| Sensitivity | A 10% Change In Supply | 
| Hysteresis | 0.75% Of Output Span | 
| Media | Air | 
| Measured Media | Liquids | 
|---|---|
| Analogue Outputs | 4...20 MA | 
| Size | 1/2 - 4 Inch | 
| Housing Material | Aluminum, Stainless Steel | 
| Power | 0.2-2.2KW | 
| Certifications | CRN, CUTR, Fugitive Emission, PED, SIL Capable | 
|---|---|
| Critical Service | Noise Abatement, Cavitation, Erosive, Low Flow, Corrosive, General Service | 
| Flow Characteristics | Equal Percentage, Linear, Special Characterization | 
| Material | Carbon Steel, Stainless, Duplex, Alloy | 
| Operating Temperature | Standard Temperature, High Temperature | 
| Warranty | Up To 5-year Limited Warranty | 
|---|---|
| Rangedown | Up To 40:1 | 
| Measurement Range | Up To 20,000 Psig (1379 Bar) Sealed Gage | 
| Communication Protocol | 4-20 MA HART | 
| Process Wetted Material | 316L SST, Alloy C-276 | 
| Type | ET | 
|---|---|
| Certified | SIL Capable, Fugitive Emission, NACE | 
| Valve Size | NPS 1/2, NPS 3/4, NPS1, NPS 1-1/2, NPS 2, NPS 3, NPS 4 | 
| Flow Characteristic | Equal Percentage, Linear, Special Characterization, Quick Opening | 
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy | 
| Supply Media | Air, Non Corrosive Gas | 
|---|---|
| Type | Digital Positioner | 
| I/O Source | 24V 2A | 
| Main Material | Aluminium, Plastic, Steel | 
| Area Classification | Area Classification |