| Product Name | Neles ND7000 Series Intelligent Valve Controller |
|---|---|
| Temperature Range | -40 ... +85 °C / -40 ... +185 °F, Standard Version |
| Communication | HART |
| Protection Class | IP66 / NEMA 4X Enclosure |
| Diagnostics | Yes |
| Type | Butterfly Valves |
|---|---|
| Brand Name | Keystone |
| Model | F990 |
| MOQ | 1 Set |
| Size | DN15 To DN300 |
| Valve Actuation | Manual Reset, Solenoid - Direct Acting |
|---|---|
| Body Material | Stainless Steel |
| Media | Air|Water |
| Pipe / Port Size | 1/4" |
| Port Type | NPTF |
| Signal Range | 4 To 20 MA · Two-wire Device, Reverse Polarity Protection · Minimum Span 4 MA |
|---|---|
| Valve Travel | 3.6 To 300 Mm |
| Sensitivity | ≤0.1 % |
| COMMUNICATION | HART® |
| Approximate Weight | 3.5 Kg (8.0 Pounds) |
| Communication Protocol | 4-20mA Analog |
|---|---|
| Model Number | 3582i |
| Mounting Type | Actuator Mounted |
| Data Interface | Wired |
| Safety Certifications | NIL |
| Accuracy | ± 0.5% |
|---|---|
| Conformity/Linearity | ± 0.5% Full Span |
| Customized Support | OEM, ODM, OBM |
| Operating | -40° F To 185° F (-40° C To 85° C) |
| Repeatability | ± 0.3% Full Span |
| Operating | -40° F To 185° F (-40° C To 85° C) |
|---|---|
| Name | Masoneilan SVI FF |
| Ambient Humidity | 10 To 95% Non-condensing |
| Customized Support | OEM, ODM, OBM |
| Supply Pressure Effect | 0.05% Per Psi Unit |
| Rated Operating Pressure | Up To 16 Bar |
|---|---|
| Diagnostic Functions | Provides Status Reports And Fault Information, Supports Equipment Management And Maintenance |
| Suitable Media | Non-corrosive Media Such As Liquids, Gases, And Steam |
| Linearity | Less Than 0.5% Of The Maximum Travel Value |
| Operating Temperature Range | -40°C To +85°C |
| Body Material | Stainless Steel |
|---|---|
| Valve Setpoint | 4-20mA, 450 Ohms Input Resistance |
| Application Scenario | Water, Steam, Gas, Etc |
| Housing Material | Aluminum |
| Orifice | DN 4.0 |
| Storage Temperature Limits | -58° F To 185° F (-50° C To 85° C) |
|---|---|
| Supply Pressure Effect | 0.05% Per Psi Unit |
| Customized Support | OEM, ODM, OBM |
| Repeatability | ± 0.3% Full Span |
| Temperature Effect | < 0.005% /° F Typical; -40° F To 180° F (< 0.01% /° C ) |