| Resolution (min) | 0.01pNa, 0.01ug/L, 0.1mV |
|---|---|
| Stability | ±0.01pNa/24h, ±1character/24h, ±0.5mV/24h |
| Output Accuracy | ±1%F.S |
| Max.load Resistance | ≤800W |
| Power Supply | (100~240)VAC, (45~65)Hz |
| Display | 192*64 Lattice LCD |
|---|---|
| Resolution (min) | 0.1ug/L, 0.01mg/L |
| Response Time (T90) | ≤60 Sec At 25oC |
| Temperature Sensor | Thermistor |
| Temperature Range | (0.0-99.9)oC |
| Display | 29%* 64 Lattice LCD |
|---|---|
| Response Time (T90) | 90% Within 90 Sec |
| Output Accuracy | ±1%F.S |
| Alarm Output | Two Alarm Relays, Programmable |
| Communication | CAN Bus (option) |
| Display | 320* 240 Lattice LCD, Chinese Or English |
|---|---|
| ResponseTime (T90) | 3 Min At 25oC |
| Repetition | 1% |
| Ambient Temperature | 5 To 45oC |
| Ambient Humidity | ≤90%RH (no Condensation) |
| Display | 320* 240 Lattice LCD, Chinese Or English |
|---|---|
| Measurement Cycle | Freely Set Between 10~60 Min. |
| Response Time (T90) | 10 Min At 25oC |
| Repeatability | ±1% |
| Ambient Temperature | 5 To 45oC |
| Measurement Range | (0~80)kV |
|---|---|
| Voltage Measurement Error | ≤±3% |
| Number Of Testing Breaker | Single |
| Time Of Breakdown | ≤10ms |
| Standstill Time | (1~10) Min (Adjustable) |
| Measurement Temperature Range | Room Temperature~100℃ (Optional) |
|---|---|
| Testing Hole | 3 |
| Temperature Control Accuracy | ±0.5℃ |
| Stirring Rate | 1500r/min±15r/min |
| Heating Rate | 800W |
| Range | Ambient Temperature~400℃; |
|---|---|
| Accuracy | Flash Point≤110℃: ±1℃ |
| Repeatability | Flash Point≤110℃: 2℃ |
| Power Consumption | ≤300W |
| Reproducibility | ≤10℃ |
| Range | Ambient Temperature~400℃; |
|---|---|
| Accuracy | ±2℃ |
| Repeatability | ≤3℃ |
| Resolution | 0.1℃ |
| Ignition Type | Automatic Electronic/gas Ignition |
| Display | Chinese/ English, TFT Color LCD |
|---|---|
| Measuring Medium | NaOH, HCl, NaCl, H2SO4, HNO3 |
| Resolution | Conductivity: 1mS/cm; Concentration: 0.01% |
| Stability | ±1.0%FS/30min |
| Temperature Sensor | PT1000 |