| Input Signal | 4-20 MA |
|---|---|
| Supply Pressure | 1.4-7 Bar |
| Air Consumption | 0.036 Nm³/h At 400 KPa |
| Feeding Connection | 1/4" NPT |
| Electrical Connection | 1/2" NPTF |
| Standard Body Material | High-strength Aluminum Alloy |
|---|---|
| Operating Air Pressure | Typical 5.6 Bar |
| Air Supply Port Size | For Example, 1/4" NPT |
| Mounting Standard | ISO 5211 Direct Mount |
| Output Shaft Type | For Example, Square Shaft With Hole |
| Sensitivity | A 10% Change In Supply |
|---|---|
| Minimum Current | 4-20 MA DC Constant Current |
| Area Classification | Explosion Proof, Intrinsically Safe, Non-incendive, Dust |
| Operative Temperature Limits | -40 To 82℃ |
| Electrical Connection | 1/2-14 NPT Conduit Connection |
| Mounting Type | Direct Or Remote Mounting On Rotary Or Linear Control Valves |
|---|---|
| Communication Protocol | HART (Highway Addressable Remote Transducer) |
| Input Signal | 4-20 MA DC |
| Air Supply Pressure | 1.4 To 7 Bar (20 To 100 Psi) |
| Air Consumption | Approx. 0.4 Kg/h (at 1.4 Bar) |
| Communication Port Protocol | HART, 4...20 MA Profibus FOUNDATION Fieldbus |
|---|---|
| Pneumatic Connection Type | 0.25 Inch 18 NPT G 1/4 |
| Input Pressure | 1.4...6 Bar |
| Stroke Range | 8...260 Mm |
| Maximum Hysteresis | 0.3 % |
| Product Type | Acid Resistant Ball Valves |
|---|---|
| Connection Type | Clamp |
| Full Bore Size | 1" (25A) ~ 2 1/2" (65A) |
| Reduced Bore Size | 3" *2 1/2" ~ 4" *3" |
| Body Rating | ANSI Class 150, JIS 10K |
| Mounting Compatibility | GULDE Full Series And Other Actuators Meeting IEC/VDI/NAMUR Standards |
|---|---|
| Input Signal | 4-20 MA DC Standard, Min. 8.5V (analog) / 9.0V (HART) |
| Output Action | 0.5 To 7 Bar, Single-acting, Reaches 95% Of Supply |
| Air Supply | Max 7 Bar, Requires Clean Dry Air Per ISA 7.0.01 Standard |
| Operating Temperature | -40 To 85 °C, LCD May Fail Below -20 °C |