| Voltage | 110V/220V |
|---|---|
| Port | Main Ports In China |
| Communication Protocol | HART |
| Actuator Area | 160 Cm² · 320 Cm² |
| Connectin | 1/4 NPT |
| Mounting Compatibility | GULDE Full Series And Other Actuators Meeting IEC/VDI/NAMUR Standards |
|---|---|
| Input Signal | 4-20 MA DC Standard, Min. 8.5V (analog) / 9.0V (HART) |
| Output Action | 0.5 To 7 Bar, Single-acting, Reaches 95% Of Supply |
| Air Supply | Max 7 Bar, Requires Clean Dry Air Per ISA 7.0.01 Standard |
| Operating Temperature | -40 To 85 °C, LCD May Fail Below -20 °C |
| Area Classification | ATEX Group II Category 2 Gas And Dust, CUTR For Groups II/III Category 2 Equipment |
|---|---|
| Communication Protocol | 3-15 Or 6-30 Psi, 0.2 -1.0 Or 0.4 -2.0 Bar Pneumatic Signal |
| Diagnostics | No |
| Input Signal | Pneumatic |
| Max Outlet Pressure | 150 Psi |
| LCD Interface / Housing Material | With Display And Pushbuttons |
|---|---|
| Input Voltage Range | 10-30V (Ex Ia) / 18-30V (Ex D) / 17V-30V |
| Communications | 4-20mA Loop Powered With - HART Communications |
| Electronics | 4-20mA - Loop Powered |
| Model Number | Svi2 Ap-21123121 |
| Condition | New And Origin |
|---|---|
| Communication Protocol | 4-20mA Analog |
| Mounting Type | Actuator Mounted |
| Warranty | 1 Year |
| Model Number | 3582i |
| COMMUNICATION | HART® |
|---|---|
| CONTROL LOOP | 4 To 20 MA |
| Static Destruction Limit | 40 V, Internal Current Limit Approx. 40 MA |
| Model Number | 3730 |
| Operating Temperature | Standard Temperature, High Temperature |
| Minimum Current | 3.6 MA For Display 3.8 MA For Operation |
|---|---|
| Deviation | ≤1 % |
| Direction Of Action | Reversible |
| Warranty | 1 Year |
| Customized Support | OEM |
| Voltage | 110V/220V |
|---|---|
| Port | Main Ports In China |
| Communication Protocol | HART |
| Actuator Area | 160 Cm² · 320 Cm² |
| Connectin | 1/4 NPT |
| Type | Pneumatic Diaphragm Actuator |
|---|---|
| Operating Pressure | 3.0 - 4.2 Bar /44 - 60 Psi |
| Outout Thrust | 1890 - 22800 N / 424 - 5125 Lb.f |
| Series | VD - Linear Single Acting |
| Temperature Range | -55 ...+85 °C / -67 ...+185 °F |
| Input Signal | 4-20 MA HART |
|---|---|
| Air Supply | 1.4 To 10.3 Bar (20 To 150 Psig) |
| Protection Rating | IP66 |
| Operating Temperature | -40°C To 80°C (-40°F To 176°F) |
| Communication Protocol | HART 6/7 |