| Diagnostic Functions | Provides Status Reports And Fault Information, Supports Equipment Management And Maintenance |
|---|---|
| Linearity | Less Than 0.5% Of The Maximum Travel Value |
| Zero Point Drift | Less Than 0.1% Of The Maximum Travel Value |
| Material | Aluminum Alloy Or Stainless Steel |
| Suitable Media | Non-corrosive Media Such As Liquids, Gases, And Steam |
| Input Signal | Electric |
|---|---|
| Supply Media | Air |
| Model Number | 3582i |
| Area Classification | Explosion Proof, Intrinsically Safe, Non-incendive, Dust |
| Data Interface | Wired |
| Ingress Protection | IP66 |
|---|---|
| Input Signal | 4 ~ 20 MA DC |
| Housing Material | Aluminum |
| Acting Type | Single / Double |
| Linearity | ± 0.5 % F.S. |
| Ingress Protection | IP66 |
|---|---|
| Input Signal | 4 ~ 20 MA DC |
| Housing Material | Aluminum |
| Acting Type | Single / Double |
| Linearity | ± 0.5 % F.S. |
| Ingress Protection | IP66 |
|---|---|
| Input Signal | 4 ~ 20 MA DC |
| Housing Material | Aluminum |
| Acting Type | Single / Double |
| Linearity | ± 0.5 % F.S. |
| Condition | New |
|---|---|
| Hysteresis + DeadBand | +/- 0.3 Percent Full Span |
| Minimum Current Signal | 3.2 MA |
| Pneumatics | Air Or Sweet Natural Gas – Regulated And Filtered |
| Signal Communication | HART 5 Or 7 Over 4-20mA |
| Condition | New |
|---|---|
| Hysteresis + DeadBand | +/- 0.3 Percent Full Span |
| Minimum Current Signal | 3.2 MA |
| Pneumatics | Air Or Sweet Natural Gas – Regulated And Filtered |
| Signal Communication | HART 5 Or 7 Over 4-20mA |
| Supply Pressure | Beta 5: 1.4-7 Bar (20-100 Psi) /Beta 7: 1.4-10 Bar (20-150 Psi) |
|---|---|
| Ambient Temperature | Standard: -40°C To +85°C (-40°F To +185°F) |
| Communication | HART 5/7, FF Foundation Fieldbus (Optional) |
| Application Industry | Oil & Gas, Chemical, Power Industry Valve Control |
| Ingress Protection (IP) | IP66/67 (Dust/Waterproof) |
| Operating Temperature | -55 °C To +85 °C (-67 °F To +185 °F) |
|---|---|
| Communications Protocol | Analog, HART, Foundation Fieldbus, Discrete I/O |
| Air Consumption | 0.3 SCFM (standard); 0.075 SCFM (low-bleed) @ 60 Psi |
| Output Capacity | 18 SCFM @ 60 Psi (standard/low-bleed Relay) |
| Diagnostics | Yes |
| Max Outlet Pressure | 101 Psig |
|---|---|
| Operating Temperature | Standard Temperature, High Temperature |
| Process Control | Flow, Pressure, Temperature, Level |
| Supply Media | Air, Non Corrosive Gas |
| Input Signal | Electric |