| Area Classification | ATEX Group II Category 2 Gas And Dust, CUTR For Groups II/III Category 2 Equipment |
|---|---|
| Communication Protocol | 3-15 Or 6-30 Psi, 0.2 -1.0 Or 0.4 -2.0 Bar Pneumatic Signal |
| Diagnostics | No |
| Input Signal | Pneumatic |
| Max Outlet Pressure | 150 Psi |
| Product Name | KOSO PPA801 Smart Positioner Electro Pneumatic Positioner |
|---|---|
| Brand | KOSO |
| Model | PPA801 |
| Matrial | Alloy/Steel |
| Valve Style | Positioner |
| Maximum Hysteresis | 0.3 % |
|---|---|
| Stroke Range | 8-260 Mm |
| Model Number | SRD991 |
| Input Pressure | 1.4-6 Bar |
| Linearity | < 0.4 % Of The Travel Span |
| Set Point | 4 To 20 MA |
|---|---|
| Valve Travel | 3.6 To 300 Mm |
| Opening Angle | 24 To 100° |
| Material | Aluminum |
| Communication | HART® Field Communication Protocol |
| Data Interface | Wired |
|---|---|
| Input Signal | Electric |
| Position Control | Throttling Control, On/Off |
| Model Number | DVC6200 |
| Process Control | Flow, Pressure, Temperature, Level |
| Product Name | Neles ND7000 Intelligent Valve Controller |
|---|---|
| Communication | HART |
| Diagnostics | Yes |
| Protection Class | IP66 |
| Temperature Range | -40 ... +85 °C / -40 ... +185 °F, Standard Version |
| Air Source Pressure | 0.2~0.8MPa |
|---|---|
| Temperature | -30℃~+70℃ (Standard) |
| Protection Rating | IP65 |
| Basic Error | ≤±1% |
| Input Signal | 4~20mA DC |
| Certifications | CRN, CUTR, Fugitive Emission, PED, SIL Capable |
|---|---|
| Critical Service | Noise Abatement, Cavitation, Erosive, Low Flow, Corrosive, General Service |
| Flow Characteristics | Equal Percentage, Linear, Special Characterization |
| Material | Carbon Steel, Stainless, Duplex, Alloy |
| Operating Temperature | Standard Temperature, High Temperature |
| Input Signal | Electric |
|---|---|
| Data Interface | Wired |
| Position Control | Throttling Control, On/Off |
| Supply Media | Air, Natural Gas, Nitrogen |
| Process Control | Flow, Pressure, Temperature, Level |
| Communication Protocol | 4-20 MA HART |
|---|---|
| Output Signal | Pneumatic Pressure Up To 145 Psig (10 Bar) |
| Protection Rating | IP66/IP67 (dust-tight And Water-resistant) |
| Power Supply | 24V DC (9.5V Minimum For Analog Control, 10V For HART) |
| Accuracy | ±0.50% Of Output Span (independent Linearity) |