Artsen Plus500 / 400 / 350 D / P / Q series
Intelligent gas shielded welding process platform welding machine
Constantly realize your craft conjecture
Intelligent welding platform, process mode constantly updated!
Product features:
1. Full digital intelligent control, 100kHz ultra-high inverter frequency, "zero delay" [1] sampling circuit, make accurate power response to each state of droplet transition.
2. The unique design of power energy release, the current drop slope as high as 10000 a / MS, to achieve the "zero impact" of current force on the molten pool at the moment of droplet transition [2].
3. Large torque and low inertia worm motor, with 120 line high-precision code disk and high-frequency motor control system, can obtain millisecond level motor start, brake and reverse tapping, and realize the precise control of arc starting and arc retracting. With the corresponding process parameter control, the better effect of starting and stopping arc can be achieved.
4. Double remote sampling compensation at both positive and negative ends, even if the welding circuit is more than 30 meters, can still accurately judge the droplet transition process state, and realize the droplet transition fine control.
5. Stable and comprehensive high-speed hardware platform, open software system, continuous expansion of process control procedures according to different welding conditions, accumulation of welding expert database, to meet customers' continuous update of welding process requirements.
Explain:
[1] Compared with artsen I, the sampling speed of artsen plus is increased by about 13 times.
[2] At the moment of droplet transition, the power supply actively releases the arc energy to maintain the arc with a minimum current, so as to ensure that the current force does not impact the molten pool.
(function part)
(new job mode, free to match welding process)
(double pulse? Double DC? DC + pulse? It's up to you!)
1. Each job can independently set the duration, control mode, control parameters, collaboration parameters, gradient slope and other characteristics.
2. Single job realizes double process collaboration, discards complex external job switching commands, and only needs to press the welding gun once to realize alternative welding of existing processes.
3. Smooth transition between jobs with different characteristics can greatly reduce the arc distortion and welding spatter during job switching. The transition characteristics can be freely set in each job.
(process part)
(process type, constantly updated)
1. Tranquil fusion [3]
Process characteristics:
The arc energy can be adjusted to effectively reduce the heat input of welding.
The arc is soft, the pool is calm, and the spatter is very low.
The arc is stable, greatly improving the welding speed.
Welding fusion is good, reducing the probability of bad welding such as porosity and undercut.
Application scope:
It is widely used for welding thin and ultra-thin plates of carbon steel, stainless steel, galvanized steel, dissimilar metals, etc., especially for backing welding and all position welding.
2. Bottom fusion [4]
Process characteristics:
Arc length, high stiffness, strong directivity, greatly improve the walking speed of welding.
Low welding heat input, very low spatter.
Good welding fusion, reduce the probability of bad welding such as porosity and undercut, and reduce the requirements for welding peripheral parts and labor protection appliances.
Application scope:
It is widely used in pulse welding of carbon steel, stainless steel, galvanized steel, high strength steel and other materials;
3. Clean fusion [5]
Process characteristics:
The welding is fast, the energy is strong and weak, and the scale is clear.
Welding heat input is low, penetration is deep, weld gap tolerance is high and spatter is very low.
Application scope:
It is widely used for welding thin and ultra-thin plates such as carbon steel, stainless steel, galvanized plate, aluminum and its alloy, especially for vertical up welding.
4. Leaping fusion [6]
Process characteristics:
With short arc starting time and simple arc stopping, the weld pool can be formed rapidly, which can further reduce the heat input to the base metal and further reduce the thermal deformation of the base metal.
The scale pattern is clear and the welding rhythm is fast [7].
The welding penetration is deep and the tolerance of gap is high.
Application scope:
It is widely used in the welding of carbon steel, stainless steel, galvanized plate, aluminum and its alloy and other thin and ultra-thin plates.
5. Constant fusion [8]
Process characteristics: the welding penetration is not affected by the fluctuation of the dry elongation of the welding wire, and the same penetration is always maintained.
Application scope: widely used in robot, special machine and other automatic welding;