Send Message
Home > products > Pressure Reducing Valve >
Samson Steel Type Pneumatic Solenoid Valve For Controlling Pneumatic Linear Actuators

Samson Steel Type Pneumatic Solenoid Valve For Controlling Pneumatic Linear Actuators

self operated regulator

fisher relief valve

Place of Origin:

Garmany

Brand Name:

Samson

Certification:

CE EAC

Model Number:

3766

Contact Us

Request A Quote
Product Details
Attachment:
Pipe Or Wall Mounting
Mounting Position:
Upright, Condensate Drainage Downwards
Ambient Temperature:
-40 … +60°C
Material:
Steel
Weight, Approx.:
1.8 Kg
Degree Of Protection:
IP 54
Product Description

Samson steel Type 3766 positioner Solenoid valve for controlling pneumatic linear actuators

 

Product Introduction

 

The positioners ensure a predetermined assignment of the valve position (controlled variable x) to the input signal (reference variable w). They compare the input signal received from a control system to the travel of the control valve and issue a corresponding output signal pressure pst (output variable y). A reversing amplifier for double-acting actuators produces two opposed signal pressures.
 
Special features

 

Any mounting position possible, suitable for normal or split-range operation, excellent dynamic response, negligibly small influence of supply air, adjustable proportional band (P band), adjustable air output capacity, low air supply consumption, very insensitive to mechanical vibrations, low-maintenance compact design. • Versions for use in hazardous areas in type of protection intrinsic safety II 2G Ex ia IIC T6 or II 3G Ex nA II T6 for Zone 2 • Type of protection "Flameproof enclosure" Ex d with Type 3766 Positioner and Type 6116 i/p Converter (Fig. 2) • Direct attachment to Type 3277 Actuator (Fig. 3) • Attachment to actuators according to IEC 60534-6 • Attachment to rotary actuators according to VDI/ VDE 3845 Benefits of direct positioner attachment (Fig. 3) • Tight and exact mechanical connection between actuator and positioner. No misalignment during shipping. • Travel pick-off protected against touching and external influences, meeting the requirements of the German Accident Prevention Regulations (VBG 5) • Simple pneumatic connection between actuator and positioner • Ready-adjusted unit: actuator with positioner Optionally with pressure gauge for monitoring the supply air and signal pressure (dial range from 0 to 6 bar and 0 to 90 psi).
 
Samson Steel Type Pneumatic Solenoid Valve For Controlling Pneumatic Linear Actuators 0
 
The check valve (3) closes when the control pressure decreas
es. After the actuator pressure and control pressure reach a
certain differential pressure, the diaphragm plate (1) releases
the seat of the exhaust port (EXH), causing the actuator to be
vented quickly.
The adjustable restriction screw (4) prevents the air from being
exhausted quickly during normal control mode and is used to
set the venting characteristic. The access to the restriction
screw is secured by a cotter pin inserted in the hole (5).
To reduce the noise level, mount a silencer with sufficient spec
ifications concerning strength and flow rate.
 

Specifications


 
Design
Solenoid with flapper/nozzle assembly and diaphragm switching elements
Degree of protection
 
IP 54 with filter ∙ IP 65 with filter check valve
Enclosure
AlMg, powder coated, gray beige RAL 1019
Ambient temperature -40° to + 60
Screws
1.4571
Springs

 Power supply

230 V (+10/–15 %), 50 Hz
230 V (+10/–15 %), 60 Hz
24 V (+10/–15 %), 50 Hz
24 V (+10/–15 %), 60 Hz
Duty type
S1 - 100 % according to EN 60034-1
Degree of protection
IP 54 according to EN 60529,
IP 65 with cable glands (can be retrofitted) 1)
Suspended mounting not permitted
Signal pressure (output)
0 bar up to the capacity of the supply pressure · Can be limited to approx. 2.3 bar by software
Permissible ambient temperature
–20 to +80 °C
–25 to +80 °C with metal cable gland
The limits in the test certificates additionally apply for explosion-protected versions
Influences
Temperature: ≤0.15 %/10 K
Effect of vibration: ≤0.25 % up to 2000 Hz and 4 g according to IEC 770
Supply air: None


Detailed Image


 

Samson Steel Type Pneumatic Solenoid Valve For Controlling Pneumatic Linear Actuators 1

 

Packaging and Delivery


Export wooden boxes for foreign trade, IPPC sterilized wooden boxes and plywood boxes for export customs inspection-free.  Size: 60*30*40 (cm)

The products will be shipped after receiving the deposit or full payment within 15 working days

 

Our Service


1. Swift delivery
For common parts, we can deliver the goods within 3 days

2. Original products
All the products we sell are from origin manufacturer. We will submit all the manufacturer documentation while we finish delivery.

3. Quality Assurance

4. Technical Support
Including inspection, repair, and maintenance, we can give all kinds of technical support.

5. Quickly response
Our staffs will keep 24h online and answer your question very quickly.

Send your inquiry directly to us

Privacy Policy China Good Quality Kuka Robot Arm Supplier. Copyright © 2019-2024 shgongboshi.com . All Rights Reserved.