1.Swift delivery
For common parts, we can deliver the goods within 3 days
2.Original products
All the products we sell are from origin manufacturer. We will submit all the manufacturer documentation while we finish delivery.
3.Quality Assurance
4.Technical Support
Including inspection,repair and maintenance, we can give all kinds of technical support.
5.Quickly responce
Our staffs will keep 24h online and answer your question very quickly.
Product Description
pneumatic parts ROTORK YTC SPTM-5V Smart Position Transmitter for valve
Flame type of Electronic Position Transmitter SPTM-6V senses mechanical position change of stem being on the valve or similar
device : and converses to current signal of DC4~20mA outputs.
* Convenient wiring: 2 wire type
* High accuracy and reliability
* Simple change for RA v.s. DA action setting
Specifications
Special features
➢ Be sure to have protective equipment and
comply with safety regulations.
comply with safety regulations.
➢ After setting the pressure, secure the nut so that the adjustment bolt does not turn.
➢ Supply
pressure should be used with clean air.
pressure should be used with clean air.
➢ Use within specifications specified in the manual. Exceeding the specification may
result in damage to the product or accident.
result in damage to the product or accident.
➢ If there is any impact on the product, it may cause malfunction or failure, so be
careful during handling, installation and operation.
careful during handling, installation and operation.
➢ For maintenance, periodically open the drain plug at the bottom of the
product to discharge the condensate.
product to discharge the condensate.
➢ Exhaust to the atmosphere are made through a small exhaust hole next to the spring case.
➢Install the product with the adjustment bolt facing up. Otherwise, the life cycle of the product may be shortened or moisture and
foreign substance may enter into the vent hole, leading to damaging internal parts.
foreign substance may enter into the vent hole, leading to damaging internal parts.
Packing & Delivery
Our Service
Our Company
Xiangjing(Shanghai)Mechanical and Electrical Tech. Co., Ltd.
Xiangjing(Shanghai)Mechanical and Electrical Tech. Co., Ltd. is mainly engaged in the technical development, technical consultation, technical service, installation and commissioning services of marine engineering, oil and gas, petrochemical, water conservancy and hydropower, thermal power generation and other mechanical and electrical equipment products; Well-known brand fluid control valves; instrumentation; hydraulic pipe fittings; bearings; seals; industrial automation and other high-tech enterprises.
FAQ
Related Products