Masoneilan SVI2 is a high-performance intelligent digital valve positioner developed by Baker Hughes Masoneilan. Built with a 32-bit microprocessor and non-contact magnetic travel sensor, it is powered by a two-wire 4–20mA loop signal and compatible with HART 5/7 communication protocols. This device delivers ultra-precise positioning control for linear and rotary pneumatic actuators, supporting both single-acting and double-acting execution structures.
Unlike traditional analog positioners, SVI2 integrates full-process auto-tuning, built-in multi-channel pressure sensors, and comprehensive valve diagnostic functions. Its modular metal enclosure reaches IP66 protection grade and holds global hazardous area certifications including ATEX, IECEx, FM and SIL 2 safety integrity level certification. With universal mounting interfaces, it can be directly retrofitted on Masoneilan and third-party pneumatic control valves, widely adopted in oil & gas, chemical, power, metallurgy and energy pipeline industries for stable, low-maintenance precise flow regulation.
| Item | Parameter |
|---|---|
| Model Series | Masoneilan SVI2 (SVI II AP) |
| Input Control Signal | 4–20mA DC two-wire loop powered |
| Communication Protocol | HART 5 / HART 7 |
| Position Detection | Non-contact magnetic sensor |
| Control Accuracy | ±0.5% FS typical, ±0.25% FS optimized |
| Repeatability | ±0.2% Full Scale |
| Hysteresis | ≤0.3% FS |
| Supply Air Pressure | 1.4–7 bar (20–100 psi) |
| Pneumatic Action Type | Single-acting / Double-acting |
| Actuator Compatibility | Linear / Rotary (0–100° rotation) |
| Ambient Temperature Range | -50℃ ~ +85℃ |
| Enclosure Rating | IP66 / NEMA 4X |
| Housing Material | Copper-free cast aluminum |
| Wetted Pneumatic Parts | Stainless steel |
| Safety Certification | SIL 2, ATEX, IECEx, FM, CSA Intrinsically Safe / Flameproof |
| Air Connection Thread | NPT 1/4 or G1/4 optional |
| Electrical Conduit Port | NPT 1/2 internal thread |
| Mounting Standard | ISO 5211 universal valve actuator mounting |
Upstream & Midstream Oil & Gas: Onshore oilfields, natural gas gathering stations, crude oil pipelines, gas transmission trunk lines, compressor stations
Petrochemical & Fine Chemical Plants: Reactor flow control, distillation tower regulating valves, high/low temperature medium pipelines, corrosive fluid process loops
Power Generation Industry: Thermal power plant steam/water circulation control, flue gas desulfurization & denitrification systems, boiler feedwater regulation
Metallurgy & Mineral Processing: High-temperature furnace gas regulation, acid-base waste liquid treatment, mineral slurry flow control
Water Treatment & Energy Storage: Industrial wastewater treatment, desalination plants, hydrogen production and energy storage medium control
Other Heavy Industries: Fertilizer plants, pulp & paper manufacturing, offshore platform process control
A1: Yes. SVI2 adopts ISO 5211 universal mounting structure, compatible with all mainstream linear and rotary pneumatic actuators. It supports direct retrofit without modifying valve brackets.
A2: No. It is fully loop-powered by the 4–20mA control signal, no extra power wiring needed.
A3: Yes. The external LCD and pushbutton interface enables full parameter setting without opening the sealed housing, meeting explosion-proof operation requirements.
A4: Valve travel deviation, actuator pressure balance, air leakage status, valve friction abnormality, sensor health status and historical operation records for predictive maintenance.
A5: Three modes are supported: Fail Open, Fail Close and Fail Lock to meet different process safety requirements.
A6: Standard model covers -50℃ ~ +85℃; low-temperature customized versions are available for cold-region oilfield projects.
For quotation, technical support, model selection and bulk order inquiries:
WeChat / WhatsApp / Phone: +86 15116291548
We provide original Masoneilan SVI2 units, installation guidance, after-sales maintenance and one-stop industrial valve automation solutions.