| Type | 3710 |
|---|---|
| Communication Protocol | 3-15 Or 6-30 Psi, 0.2 -1.0 Or 0.4 -2.0 Bar Pneumatic Signal |
| Safety Certification | NIL |
| Diagnosis | No |
| Input Signal | Pneumatic |
| Type | 3720 |
|---|---|
| Communication Protocol | 4-20mA Analog |
| Safety Certification | NIL |
| Diagnosis | No |
| Input Signal | Electrical |
| Type | EZ |
|---|---|
| Certified | SIL Capable, Fugitive Emission, NACE |
| Valve Size | NPS 1/2, NPS 3/4, NPS1, NPS 1-1/2, NPS 2, NPS 3, NPS 4 |
| Flow Characteristic | Equal Percentage, Linear, Special Characterization, Quick Opening |
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy |
| Type | GX |
|---|---|
| Certified | CRN, CUTR, Fugitive Emissions, PED, SIL Compliance |
| Valve Size | NPS 1/2, NPS 3/4, NPS 1, NPS 1-1/2, NPS 2, NPS 3, NPS 4, NPS 6 |
| Flow Characteristic | Balance Percentage, Linearity, Characterization |
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy |
| Type | GX |
|---|---|
| Certified | CRN, CUTR, Fugitive Emissions, PED, SIL Compliance |
| Valve Size | NPS 1/2, NPS 3/4, NPS 1, NPS 1-1/2, NPS 2, NPS 3, NPS 4, NPS 6 |
| Flow Characteristic | Balance Percentage, Linearity, Characterization |
| Material | Carbon Steel, Stainless Steel, Double-sided, Alloy |
| Type | 4763 Electropneumatic Positioner |
|---|---|
| Controlled Variable (travel Range) | 7.5 To 60 Mm, With Lever Extension: 7.5 To 90 Mm |
| Usage | Throttling Service |
| Attachment To | Linear Actuator, Single Acting |
| Control Loop | 4 To 20 MA; 0 To 20 MA; 1 To 5 MA |
| Type | 3731-3 |
|---|---|
| Control Loop | 4 To 20 MA |
| Optional Solenoid Valve | With |
| Valve Diagnostics | With |
| Explosion Protection | Without Certification Type Of Protection "Flameproof Enclosure" |
| Type | 3725 Electropneumatic Positioner |
|---|---|
| Reference Variable | 4 To 20 MA |
| Travel | 5 To 50 Mm |
| Opening Angles | 24 To 100° |
| Minimum Current | 3.8 MA |
| Type | 3730-0 |
|---|---|
| Set Point | 4 To 20 MA |
| Travel | 5.3 To 300 Mm |
| Load Impedance | ≤ 6 V |
| Minimum Current | 3.6 MA |
| Type | 4763 Electropneumatic Positioner |
|---|---|
| Controlled Variable (travel Range) | 7.5 To 60 Mm, With Lever Extension: 7.5 To 90 Mm |
| Usage | Throttling Service |
| Attachment To | Linear Actuator, Single Acting |
| Control Loop | 4 To 20 MA; 0 To 20 MA; 1 To 5 MA |