| Measurement Principle | Vortex |
|---|---|
| Pressure | 2.5-6.4Mpa |
| Sensitivity | Up To 150:1 |
| Degree Of Protection | IP66 |
| Port | Main Ports In China |
| Connection Type | Threaded/Flanged |
|---|---|
| Port | Main Ports In China |
| Temperature Compensation | (0.1 To 60.0)oC (auto Or Manual) |
| Flow Characteristics | Linear, Equal Percentage, Quick Opening |
| Measurement Principle | Vortex |
| Storage Function | 1000 Record Can Be Saved |
|---|---|
| Wetted Material | Stainless Steel; 316 / 316L And CF3M |
| Rangedown | Up To 150:1 |
| Port | Main Ports In China |
| Wireless Update Rate | Wireless Update Rate |
| Temperature Range | 0 - 200 °C |
|---|---|
| Fluid Media | Air, Water, Oil, Gas |
| Process Connections | Threaded, Flange, Hygienic, Remote Seal |
| Condition | New |
| Supply Voltage | 12 To 42.4 VDC |
| Alarm Outputs | No Flow, High Alarm And Low Alarm |
|---|---|
| Fluid Media | Air, Water, Oil, Gas |
| Diagnostics | Basic Diagnostics, Process Alerts, Loop Integrity Diagnostics, Plugged Impulse Line Diagnostics |
| Communication Protocol | 4-20 MA HART®, WirelessHART®, FOUNDATION™ Fieldbus, PROFIBUS® PA, 1-5 V Low Power HART® |
| Wireless Update Rate | 1 Sec. To 60 Min., User Selectable |
| Process Connections | Threaded, Flange, Hygienic, Remote Seal |
|---|---|
| Wireless Range | Internal Antenna (225 M) |
| Rangedown | Up To 150:1 |
| Condition | New |
| Fluid Media | Air, Water, Oil, Gas |
| Ambient Relative Humidity | ≤85% |
|---|---|
| Connection Type | Flange, Thread |
| Diagnostics | Basic Diagnostics, Process Alerts, Loop Integrity Diagnostics, Plugged Impulse Line Diagnostics |
| Pressure | 2.5-6.4Mpa |
| Wireless Update Rate | Wireless Update Rate |
| Product Name | Promag W 300, 5W3B50, DN50 2" |
|---|---|
| Connection Method | Flange |
| Housing | Aluminum, Coated |
| Power Supply | AC 100...240V/DC 24V |
| Output; Input | 4-20mA HART |
| Standard Body Material | High-strength Aluminum Alloy |
|---|---|
| Operating Air Pressure | Typical 5.6 Bar |
| Air Supply Port Size | For Example, 1/4" NPT |
| Mounting Standard | ISO 5211 Direct Mount |
| Output Shaft Type | For Example, Square Shaft With Hole |
| Bonnet Type | Standard Or Heat Dissipated |
|---|---|
| Trim Design | Balanced Or Unbalanced |
| Flow Characteristics | Equal Percentage/Linear/Quick Opening |
| Leakage Rating | ANSI Class IV-VI |
| Noise Reduction Rating | Meets IEC Standards |