| Set Point | 4 To 20 MA |
|---|---|
| Valve Travel | 3.6 To 300 Mm |
| Opening Angle | 24 To 100° |
| Material | Steel |
| Communication | HART® Field Communication Protocol |
| Input Signal | 4~20mA DC |
|---|---|
| Air Supply Interface | P(NPT) 1/4 |
| Protection Rating | IP66 |
| Air Consumption | Less Than 2.5 LPM (Supply Pressure = 0.14 MPa) |
| Input Pressure Range | 0.14-0.7 MPa |
| Input Signal | 4-20 MA DC |
|---|---|
| Air Connections | G Or NPT |
| Power | Hydraulic |
| Temperature Of Media | High Temperature |
| Application | General |
| Torque Range | 35-3000N.m |
|---|---|
| Noise Levels | Less Than 75dB Within 1m |
| Degree Of Protection | IP67,optional IP68 |
| Working System-Adjustable Type | S4-25%, Maximum Of 600 Triggers Per Hour |
| Input Signal-Adjustable Type | 4-20mA,0-10V;2-10V |
| Actual Orifice Diameter | 11 - 190 Mm | 0.433 - 7.087 In |
|---|---|
| Flange Rating Inlet | PN 10 - PN 250 | CL150 - CL1500 |
| Valve Connection | Flange |
| Temperature | -45 To 200 °C |
| Pressure | 2.5 - 256 Bar | 36 - 3705 Psig |
| Outlet Pressure(RB 1700) | 0.12 Bar - 2.5 Bar |
|---|---|
| Operating Temperature | -20°C To +60°C |
| Material | Cast Iron |
| Outlet Pressure(RB 1800) | 19 Mbar - 2.5 Bar |
| Inlet Pressure | 19 Bar |
| Name | Auma SA Multi-turn Electric Actuator |
|---|---|
| Torque Range | 10 Nm-32000 Nm |
| Temperature Range | -30°C To +70°C |
| Output Speeds | 4 1/min-180 1/min |
| Protection Class | IP68 |
| Size | 1/4 NPT |
|---|---|
| Opening Angle | 24 To 100° |
| Working Range | -10 To +114% |
| Voltage | 24VDC |
| Packaging Details | As required |
| Torque Range | 10 Nm-32000 Nm |
|---|---|
| Power Supply | 3ph/400V/50Hz (other Voltage On Request) |
| Paint | Silver-grey |
| Temperature Range | -30°C To +70°C |
| Protection Class | IP68 |
| Type | High-capacity, High-precision Digital Pneumatic Positioner |
|---|---|
| Flow Rate | Supply/Exhaust Cv Max 2.3 (high Flow); ≤0.3 (low Flow) |
| Certifications | Intrinsically Safe (Ex Ia), Explosion Proof (Ex D), IP66/NEMA 4X |
| Communication | 4-20mA, HART 7, USB, FDI Driver For DCS Connection |
| Operating Pressure | 2.5-10.4bar (fail Freeze 8bar, Natural Gas 6bar) |