| Communication Protocol | 4-20 MA HART |
|---|---|
| Diagnostics | Yes |
| Max Outlet Pressure | 145 Psig |
| Operating Temperature | Standard Temperature, High Temperature |
| Packaging Details | Cardboard box + protection |
| Input Current | 4-20 MA DC (Standard) |
|---|---|
| Repeatability | Within ±0.5% F.S. |
| Output Flow | ≥ 80 L/min (ANR) At 0.14 MPa Supply; ≥ 200 L/min At 0.4 MPa |
| Ambient & Fluid Temperature Range | -20 °C To 80 °C (non-hazardous Areas) |
| Weight | Approx. 2.4 Kg |
| Type | PLC EtherCAT Coupler Module |
|---|---|
| Package | 100% Original Package |
| Operating Voltage | 220 V |
| I/O Number | 1, 16, 8, 32, 256, 64, 128 |
| Communication Interface | Modbus, CC-Link, Modubus, Profibus, I/O Link, CAN Bus, DeviceNet, EtherCAT, Rs485 |
| Class Of Protection | IP65 |
|---|---|
| Temperature Range | -40 ... + 50°C /-40 ... + 65°C |
| Input | 4-20mA |
| Condition | New |
| Packaging Details | As required |
| Communication Port Protocol | HART, 4...20 MA Profibus FOUNDATION Fieldbus |
|---|---|
| Pneumatic Connection Type | 0.25 Inch 18 NPT G 1/4 |
| Input Pressure | 1.4...6 Bar |
| Stroke Range | 8...260 Mm |
| Maximum Hysteresis | 0.3 % |
| Input | 4-20 MA DC (resistance 300 Ω) |
|---|---|
| Communication | HART6 (AVP102) |
| Air Supply | 140-700 KPa |
| Air Use | 4 L/min (N) Single-acting At Balance |
| Max Flow | 110 L/min (N) Single-acting At 400 KPa |
| Housing Material | Low Copper Chromated Aluminum (ASTM A360) |
|---|---|
| Protection Rating | IP66 / NEMA 4X |
| Weight | 2 Kg (4.5 Lb) |
| Input Power/Signal | 3.2-24 MA; Compliance: 9 VDC At 20 MA, 11 VDC At 4 MA |
| Optional Outputs | Two Solid-state Switches (1A/30 VDC); 4-20 MA Position Retransmit |
| Input Signal Range | 4-20 MA (split Range Minimum Amplitude 8 MA) |
|---|---|
| Air Supply | 20 To 100 Psig (regulate 5 To 10 Psi Above Actuator Spring Range) |
| Actuator Stroke | 20 Mm To 150 Mm Or 55 ° To 90 ° |
| Action | Single Acting/fail Vent/Double Acting |
| Operating Temperature | -4 °F To +158 °F |
| Storage Temperature Limits | -58° F To 185° F (-50° C To 85° C) |
|---|---|
| Supply Pressure Effect | 0.05% Per Psi Unit |
| Customized Support | OEM, ODM, OBM |
| Repeatability | ± 0.3% Full Span |
| Temperature Effect | < 0.005% /° F Typical; -40° F To 180° F (< 0.01% /° C ) |
| Input Pressure | 1.4...6 Bar |
|---|---|
| Ambient Air Temperature For Operation | -40...80 °C (-40...176 °F) |
| Communication Port Protocol | HART, 4...20 MA Profibus FOUNDATION Fieldbus |
| IP Degree Of Protection | IP66 |
| Maximum Pressure | 6 Bar ,90 Psi |