| Zero Point Drift | Less Than 0.1% Of The Maximum Travel Value |
|---|---|
| Valve Travel Range | 10mm To 100mm |
| Valve Connection | ISO 5211 Direct Mounting Or VDI/VDE 3845 Mounting With Adapter |
| Protection Rating | IP66/67 |
| Linearity | Less Than 0.5% Of The Maximum Travel Value |
| Type | Pneumatic Diaphragm Actuator |
|---|---|
| Operating Pressure | 3.0 - 4.2 Bar /44 - 60 Psi |
| Outout Thrust | 1890 - 22800 N / 424 - 5125 Lb.f |
| Series | VD - Linear Single Acting |
| Temperature Range | -55 ...+85 °C / -67 ...+185 °F |
| Input Current Range | 4~20mA DC |
|---|---|
| Internal Impedance | 500Q(20mA DC) |
| Input Air Pressure Range | 0.14~0.7MPa |
| Travel Range | 10~150mm (straight Stroke), 0~90°C (angular Stroke |
| Air Connection Size | PT1/4, NPT1/4, G1/4 |
| Safety Level | SIL2/3 |
|---|---|
| Measurement Type | Gauge/Absolute |
| Output Signal | 4-20mA + HART |
| Stability | ±0.1%/year |
| Response Speed | <50ms |
| Safety Features | Overvoltage Protection, Reverse Polarity Protection, Short-circuit Protection |
|---|---|
| Programmability | Programmable Through FoxCom Or PC Software |
| Optional Accessories | Pressure Modules, Temperature Sensors, Communication Cables, PC Software |
| Power Output | 24V DC Nominal, 20 MA Max |
| Ramp Function | User-defined Ramp Function With Adjustable Time |
| Diagnostic Functions | Provides Status Reports And Fault Information, Supports Equipment Management And Maintenance |
|---|---|
| Linearity | Less Than 0.5% Of The Maximum Travel Value |
| Zero Point Drift | Less Than 0.1% Of The Maximum Travel Value |
| Material | Aluminum Alloy Or Stainless Steel |
| Suitable Media | Non-corrosive Media Such As Liquids, Gases, And Steam |
| Warranty | 3 Years |
|---|---|
| Model Number | DL3010 |
| Mounting Type | Integral Mounted |
| Data Interface | Wired |
| Max Outlet Pressure | 145 Psig |
| Accuracy High Accuracy | ±0.25% |
|---|---|
| Display | Integrated LCD Display |
| Interface | Local Three-button Operation |
| Communication | Supports HART Protocol |
| Data | Built-in Data Logger |
| Mounting | Horizontal/vertical/in-line |
|---|---|
| Sealing Rating | ANSI Class 150/300/600 |
| Connection | Flange/Threaded/Butt-weld |
| Explosion-proof Certification | ATEX Zone 1/IECEx |
| Control Signal | 4-20mA/Modbus/HART |
| Model Number | SVI2 |
|---|---|
| Storage Temperature Limits | -58°F To 200°F (-50°C To 93°C) |
| Relative Humidity | 10 To 90% Non-condensing |
| Fast Transient Burst | No Effect At 2 KV |
| Customized Support | OEM, ODM, OBM |