| Set Point | 4 To 20 MA |
|---|---|
| Valve Travel | 3.6 To 300 Mm |
| Opening Angle | 24 To 100° |
| Material | Aluminum |
| Communication | HART® Field Communication Protocol |
| Hysteresis + DeadBand | +/- 0.3 Percent Full Span |
|---|---|
| Repeatability | +/- 0.3 Percent Full Span |
| Signal Communication | HART 5 Or 7 Over 4-20mA |
| Type | Digital Valve Positioner |
| Supply Pressure | 20 To 150psi |
| Application | General |
|---|---|
| Material | Casting |
| Temperature Of Media | Medium Temperature |
| Pressure | Medium Pressure |
| Power | Pneumatic |
| Communication Protocol | HART 5 Or HART 7 |
|---|---|
| Analog Input Signal | 4-20 MA DC |
| Electrical Connection | 1 /2 NPT Internal Or M20 |
| Supply Voltage | 8-30 VDC |
| Media | Air & Gas |
| Hysteresis + DeadBand | +/- 0.3 Percent Full Span |
|---|---|
| Type | Digital Valve Positioner |
| Signal Communication | HART 5 Or 7 Over 4-20mA |
| Minimum Current Signal | 3.2 MA |
| Diagnostics | Standard Diagnostics,Advanced Diagnostics |
| Area Classification | Intrinsically Safe, Non-incendive For CSA And FM |
|---|---|
| Communication Protocol | HART, 4-20mA Analog |
| Data Interface | Wired |
| Diagnostics | Yes |
| Input Signal | Electric |
| Features | Easy, Simple, Accurate |
|---|---|
| Hysteresis + DeadBand | +/- 0.3 Percent Full Span |
| Operating Temperature | -50°C To +85°C |
| Type | Digital Valve Positioner |
| Power Supply | 4-20 MA |
| Case/Cover | Low Copper And Chromated Aluminum, ASTM A360 |
|---|---|
| Condition | New And Origin |
| Input Power And Signal | Input Power And Signal |
| Warranty | 1 Year |
| Ambient Temperature | –40 To 85ºC (-40 To 185ºF) |
| Media | Air |
|---|---|
| Minimum Current | 4-20 MA DC Constant Current |
| Process Control | Flow, Pressure, Temperature, Level |
| Area Classification | Explosion Proof, Intrinsically Safe, Non-incendive, Dust |
| Product Type | Valve Position |
| Communication Protocol | 4-20 MA HART |
|---|---|
| Output Signal | Pneumatic Pressure Up To 145 Psig (10 Bar) |
| Protection Rating | IP66/IP67 (dust-tight And Water-resistant) |
| Power Supply | 24V DC (9.5V Minimum For Analog Control, 10V For HART) |
| Accuracy | ±0.50% Of Output Span (independent Linearity) |