| Nominal Diameter At Inlet | DN 25 - DN 40 | 1'' - 2'' |
|---|---|
| Orifice | D - F |
| Actual Orifice Diameter D₀ | 13 - 25 Mm | 0.512 - 0.984 In |
| Actual Orifice Area A₀ | 133 - 491 Mm² | 0.206 - 0.761 In² |
| Pressure | 0.1 - 16 Bar | 1.5 - 232 Psig |
| Nominal Diameter At Inlet | DN 25 - DN 100 | 1" - 4" |
|---|---|
| Actual Orifice Diameter D₀ | 23 - 92 Mm | 0.91 - 3.62 In |
| Actual Orifice Area A₀ | 416 - 6648 Mm² | 0.645 - 10.304 In² |
| Pressure | 0.1 - 16 Bar | 1.45 - 232 Psig |
| Temperature (in Accordance With DIN EN) | -85 To 200 °C | -121 To 392 °F |
| Application | General |
|---|---|
| Material | Alloy |
| Temperature Of Media | High Temperature |
| Pressure | High Pressure |
| Power | Hydraulic |
| Body Sizes | DN 25, 50, 80, 100, 150, 200 X 150, 300 X 150 |
|---|---|
| End Connection | NPT, CL150 RF, CL300 RF, CL600 RF, CL125FF, CL250RF, BWE, SWE |
| Maximum Inlet Pressure | 400 Psig / 28 Bar Or Body Rating Limit Whichever Is Lower |
| Nitrile (NBR) | -20° To 180°F / -29° To 82°C |
| Fluorocarbon (FKM) | 0° To 300°F / -18° To 149°C |
| Use | Saturated And Superheated Steam |
|---|---|
| Available Models | UF800-65, 145, 203, 305, 464 |
| Sizes | Based On The Universal Connector |
| Installation | With The "O" Of The TOP Inscription Perfectly Aligned |
| Maximum Operating Pressure | 464 Psi (32 Bar) TMO |
| Area Classification | Intrinsically Safe, Non-incendive, Dust |
|---|---|
| Communication Protocol | 4-20mA Analog |
| Diagnostics | No |
| Input Signal | Electric |
| Max Outlet Pressure | 90 Psi |
| Application | General |
|---|---|
| Material | Alloy |
| Temperature Of Media | High Temperature |
| Pressure | High Pressure |
| Power | Hydraulic |
| Product Name | Endress+Hauser Radar Level Micropilot FMR60 For High Demands Liquid |
|---|---|
| Accuracy | +/- 1 Mm (0.04 In) |
| Process Temperature | -40...+130 °C (-40...+266 °F) |
| Process Pressure | Absolute / Max. Overpressure Limit Vacuum16 Bar (Vacuum232 Psi) |
| Max. Measurement Distance | 50 M (164 Ft) |
| Area Classification | ATEX Group II Category 2 Gas And Dust, CUTR For Groups II/III Category 2 Equipment |
|---|---|
| Communication Protocol | 3-15 Or 6-30 Psi, 0.2 -1.0 Or 0.4 -2.0 Bar Pneumatic Signal |
| Diagnostics | No |
| Input Signal | Pneumatic |
| Max Outlet Pressure | 90 Psi |
| Product Name | EMERSON Ovation Machinery Health Monitor For The Water And Wastewater Industries |
|---|---|
| Brand | EMERSON Ovation |
| Model | Machinery Health |
| Hazardous Area Classification | Ex H IIC Tx Gb |
| Accuracy | 0.15 |