| Motion Type | Linear/Rotary |
|---|---|
| Acting Type | Single / Double |
| Supply Pressure | 0.14 to 0.7 MPa (1.4 to 7 bar) |
| Conduit Entry | G 1/2 or 1/2 NPT or M20x1.5P |
| Certifications | ATEX, CUTR, PED |
|---|---|
| Communication Protocol | 3-15 or 6-30 psi, 0.2 -1.0 or 0.4 -2.0 bar Pneumatic Signal |
| Diagnostics | No |
| Input Signal | Pneumatic |
| Communication Protocol | 4-20mA Analog |
|---|---|
| Data Interface | Wired |
| Diagnostics | No |
| Input Signal | Electric |
| Input Signal | 4-20 mA DC, HART 7 communication |
|---|---|
| Pneumatic Output | Single / double acting available |
| Flow Capacity | Up to 12.7 Nm³/h (450 scfh) |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Supply Pressure | 1.4-7 bar (20-100 psig) |
|---|---|
| Air Consumption | Low power, ≤ 0.08 Nm³/h |
| Enclosure Rating | IP66 |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Supply Pressure | Min 1.5 bar; max 7 bar (101 psig) |
|---|---|
| Enclosure Rating | IP66 |
| Air Consumption | 0.06-0.12 Nm³/h |
| Operating Temp | -40°C to 80°C (-40°F to 176°F) |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
|---|---|
| Ingress Protection | IP66 |
| Input Signal | 4-20 mA DC |
| Supply Air Pressure | 1.4 to 6 bar (20 to 90 psi) |
| Certifications | ATEX, CUTR, PED |
|---|---|
| Communication Protocol | 3-15 or 6-30 psi, 0.2 -1.0 or 0.4 -2.0 bar Pneumatic Signal |
| Diagnostics | No |
| Input Signal | Pneumatic |