| Mounting Compatibility | GULDE Full Series And Other Actuators Meeting IEC/VDI/NAMUR Standards |
|---|---|
| Input Signal | 4-20 MA DC Standard, Min. 8.5V (analog) / 9.0V (HART) |
| Output Action | 0.5 To 7 Bar, Single-acting, Reaches 95% Of Supply |
| Air Supply | Max 7 Bar, Requires Clean Dry Air Per ISA 7.0.01 Standard |
| Operating Temperature | -40 To 85 °C, LCD May Fail Below -20 °C |
| Pneumatics | Air Or Sweet Natural Gas – Regulated And Filtered |
|---|---|
| Accuracy | +/- 0.5 Percent Full Span |
| Supply Pressure | 20 To 150psi |
| Air Delivery | 280 SLPM @ 30psi |
| Type | Digital Valve Positioner |
| Pneumatics | Air Or Sweet Natural Gas – Regulated And Filtered |
|---|---|
| Accuracy | +/- 0.5 Percent Full Span |
| Minimum Current Signal | 3.2 MA |
| Condition | New |
| Pneumatics Action | Single Or Double Acting, Fail Safe,Rotary And Linear |
| Area Classification | Intrinsically Safe, Non-incendive For CSA And FM |
|---|---|
| Communication Protocol | HART, 4-20mA Analog |
| Data Interface | Wired |
| Diagnostics | Yes |
| Input Signal | Electric |
| Air Delivery | 280 SLPM @ 30psi |
|---|---|
| Hysteresis + DeadBand | +/- 0.3 Percent Full Span |
| Pneumatics | Air Or Sweet Natural Gas – Regulated And Filtered |
| Condition | New |
| Pneumatics Action | Single Or Double Acting, Fail Safe,Rotary And Linear |
| Applicable Actuator | Pneumatic Single And Double Acting, Linear And Rotary Motion Actuator |
|---|---|
| Input Signal | 4-20 MA DC |
| Communication System | SFN Communication (Model AVP300/301/302)/HART6(Model AVP302) |
| Output Signal | 4-20 MA DC (Travel Transmission) |
| Lightning Protection | Peak Value Of Voltage Surge: 12 KV/Peak Value Of Current Surge: 1000 A |
| Air Supply Pressure | Single-Acting(1.4 To 6.9 Bar), Double-Acting(1.4 To 10.3 Bar) |
|---|---|
| Type | Digital Valve Positioner |
| Accuracy | +/- 0.5 Percent Full Span |
| Supply Pressure | 20 To 150psi |
| Diagnostics | Standard Diagnostics,Advanced Diagnostics |
| Repeatability | +/- 0.3 Percent Full Span |
|---|---|
| Pneumatics | Air Or Sweet Natural Gas – Regulated And Filtered |
| Linearity | +/- 1 Percent Full Scale |
| Operating Temperature | -50°C To +85°C |
| Model Number | SVI II |
| Communication Protocol | 4-20 MA HART |
|---|---|
| Output Signal | Pneumatic Pressure Up To 145 Psig (10 Bar) |
| Protection Rating | IP66/IP67 (dust-tight And Water-resistant) |
| Power Supply | 24V DC (9.5V Minimum For Analog Control, 10V For HART) |
| Accuracy | ±0.50% Of Output Span (independent Linearity) |
| Features | Easy, Simple, Accurate |
|---|---|
| Hysteresis + DeadBand | +/- 0.3 Percent Full Span |
| Operating Temperature | -50°C To +85°C |
| Type | Digital Valve Positioner |
| Power Supply | 4-20 MA |