| Material | Aluminum Alloy |
|---|---|
| Power | Pneumatic,electric |
| Structure | Control,Angle Stroke |
| Application | General,industrial |
| Standard Or Nonstandard | Standard |
| Material | Aluminum Alloy |
|---|---|
| Power | Pneumatic,electric |
| Structure | Control,Angle Stroke |
| Application | General,industrial |
| Standard Or Nonstandard | Standard |
| Material | Aluminum Alloy |
|---|---|
| Power | Pneumatic,electric |
| Structure | Control,Angle Stroke |
| Application | General,industrial |
| Standard Or Nonstandard | Standard |
| Certifications | CSA, FM, ATEX, IECEx, CUTR, Peso, KGS, INMETRO, NEPSI, RCM |
|---|---|
| Communication Protocol | 4-20mA Analog |
| Data Interface | Wired |
| Diagnostics | NO |
| Input Signal | Electric |
| Type | V Type Control Ball Valve |
|---|---|
| Body Material | Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel |
| Trim Material | Stainless Steel, Alloy Steel, Duplex Steel |
| Face To Face | ISA S75.04 (ANSI Class 150~600) |
| Seal Face Type | WF, WJ, RF, RTJ, FF |
| Communication Protocol | 4-20mA Analog |
|---|---|
| Data Interface | Wired |
| Diagnostics | No |
| Input Signal | Electric |
| Max Outlet Pressure | 150 Psi |
| Area Classification | Explosion Proof, Intrinsically Safe, Non-incendive, Dust |
|---|---|
| Communication Protocol | 4-20mA Analog |
| Data Interface | Wired |
| Diagnostics | No |
| Input Signal | Electric |
| Input Signal | 3-15 Psi Pneumatic Or 4-20 MA Electrical Signal |
|---|---|
| Standard Operating Temperature | -20°C To 70°C, Custom Range Available On Request |
| CV Max Low Flow | ND 1/4" Inlet 0.34 Outlet 0.34; ND 1/2" Inlet 0.637 Outlet 0.79 |
| Feeding Connection | ND 1/4" For SA/CL-2, ND 1/2" For SA/CL-1 |
| Supply Pressure | 2.5 To 7 Bar |
| Material | Stainless Steel,Aluminum Alloy |
|---|---|
| Power | Electric |
| Application | General,industrial |
| Standard Or Nonstandard | Standard |
| Type | Control,pneumatic |
| Type | 4763 Electropneumatic Positioner |
|---|---|
| Controlled Variable (travel Range) | 7.5 To 60 Mm, With Lever Extension: 7.5 To 90 Mm |
| Usage | Throttling Service |
| Attachment To | Linear Actuator, Single Acting |
| Control Loop | 4 To 20 MA; 0 To 20 MA; 1 To 5 MA |