| Diagnostics | Yes |
|---|---|
| Construction / Materials | Copper-free Aluminum Housing |
| Operating Temperature | -50°C To +85°C |
| Pneumatics Action | Single Or Double Acting, Fail Safe/Rotary And Linear |
| Supply Pressure(Single-Acting) | 20 To 100 Psi Max (1.4 To 6.9 Bar) |
| Set Point | 4 To 20 MA |
|---|---|
| Valve Travel | 3.6 To 300 Mm |
| Opening Angle | 24 To 100° |
| Material | Steel |
| Communication | HART® Field Communication Protocol |
| Temperature Range | -40 ... +85 °C / -40 ... +185 °F, Standard Version |
|---|---|
| Communication | HART, FOUNDATION Fieldbus, Profibus PA |
| Protection Class | IP66 / NEMA 4X Enclosure |
| Approvals | Available For HART, PROFIBUS-PA And FOUNDATION Fieldbus Networks |
| Packaging Details | Carton + Wooden Case + Protection |
| Weight | 3.5 Kg |
|---|---|
| Voltage Supply (maximum) | 30 VDC |
| Minimum Required Operating Current | 3.6 MA |
| Repeatability | < 0.25% |
| Input Signal Range | 4 - 20 MA HART |
| Communication Protocol | HART 7 |
|---|---|
| Maximum Output Pressure | 145 Psig |
| Process Control | Flow, Pressure, Temperature, Level |
| Input Signal | 4-20 MA DC, 24 VDC |
| Media Supply | Air Or Natural Gas |
| Operating Temperature Limits | -58°F To 185°F (-50°C To 85°C) |
|---|---|
| Supply Pressure Effect | 0.05% Per Psi |
| Insulation Resistance | Greater Than 10 G Ohms At 50% RH |
| Fast Transient Burst | No Effect At 2 KV |
| Relative Humidity | 10 To 90% Non-condensing |
| Input Signal | 4~20mA DC |
|---|---|
| Air Supply Interface | P(NPT) 1/4 |
| Protection Rating | IP66 |
| Air Consumption | Less Than 2.5 LPM (Supply Pressure = 0.14 MPa) |
| Input Pressure Range | 0.14-0.7 MPa |
| Set Point | 4 To 20 MA |
|---|---|
| Valve Travel | 3.6 To 300 Mm |
| Opening Angle | 24 To 100° |
| Material | Steel |
| Communication | HART® Field Communication Protocol |
| Name | KIMRAY Pneumatic ABY 318 FGT PR-D REGULATOR With Flowserve 3000MD Positioner |
|---|---|
| Connection Type | 150RF |
| Body Style | Through Body |
| Trim Type | Equal Percentage |
| Seal Class | Class VI |
| Material | Material |
|---|---|
| Flow Characteristics | Equal Percentage |
| Control Signal | 4-20 MA |
| Critical Service | Dirty Service, Erosive |
| Gas Supply Pressure Range | 140 To 700 KPa |