| Inlet Pressure Rating | 210 Psi (1.5 Mpa, 15 Bar) Maximum |
|---|---|
| Pressure Set Range | 5-4 Psi (35-280 KPa, 0.35-2.8 Bar) 5-100 Psi (35-700 KPa, 0.35-7 Bar) |
| Connection | 1/4 NPT Or Rc |
| Rated Cv | 0.25 |
| Filter Element | Sintered Porous Polyethylene (5) |
| Input Signal | 3-15 Psi And 4-20 MA |
|---|---|
| Operating Temperature | -20°C To 70°C |
| Supply Pressure | 2.5-7 Bar |
| Air Consumption | 1.02 Nm³/h At 400 KPa |
| CV Max Low Flow | 0.34 (Inlet & Outlet 1/4") |
| Accessories | Carrying Case, Test Leads, Alligator Clips, User Manual, Certificate Of Calibration |
|---|---|
| Power Output | 24V DC Nominal, 30 MA Max |
| Output Resolution | 0.001 MA |
| Power Supply | 9V DC 4 X 1.5V AA Batteries Or Rechargeable Battery |
| Display | LCD Display, 2 Lines X 16 Characters |
| Battery Life | Approx. 30 Hours Continuous Use At 20 MA Output |
|---|---|
| Accessories | Carrying Case, Test Leads, Alligator Clips, User Manual, Certificate Of Calibration |
| Power Output | 24V DC Nominal, 30 MA Max |
| Optional Accessories | Pressure Modules, Temperature Sensors, Communication Cables, PC Software |
| Power Supply | 9V DC 4 X 1.5V AA Batteries Or Rechargeable Battery |
| Accuracy | +/- 0.5 Percent Full Span |
|---|---|
| Model Number | SVI II |
| Operating Temperature | -50°C To +85°C |
| Materials | Copper-free Aluminum Housing |
| Linearity | +/- 1 Percent Full Scale |
| Data Interface | Wired |
|---|---|
| Input Signal | Electric |
| Position Control | Throttling Control, On/Off |
| Model Number | DVC6200 |
| Process Control | Flow, Pressure, Temperature, Level |
| Sensitivity | A 10% Change In Supply |
|---|---|
| Minimum Current | 4-20 MA DC Constant Current |
| Area Classification | Explosion Proof, Intrinsically Safe, Non-incendive, Dust |
| Operative Temperature Limits | -40 To 82℃ |
| Electrical Connection | 1/2-14 NPT Conduit Connection |
| Output Speed | 4 To 180 Rpm |
|---|---|
| Certifications | ATEX, FM, IEC, And CSA Approvals. Intrinsically Safe And Non-incendive (energy Limited) |
| Corrosion Protection | KS |
| Seal Protection | IP68 |
| Temperature Of Media | High Temperature |
| Maximum Hysteresis | 0.3 % |
|---|---|
| Stroke Range | 8-260 Mm |
| Model Number | SRD991 |
| Input Pressure | 1.4-6 Bar |
| Linearity | < 0.4 % Of The Travel Span |
| Input Signal Options | 4-20 MA (analog), HART, FOUNDATION Fieldbus |
|---|---|
| Air Supply Pressure | 3-7 Bar |
| Protection Rating | IP66 |
| Accuracy | ≤ 0.25 % |
| Temperature Range | -52 °C To +85 °C (-62 °F To +185 °F) |