| Minimum Current Signal | 3.2mA |
|---|---|
| Pressure | High Pressure |
| Protection Level | IP54 |
| Maximum Voltage | 30.0 VDC |
| Weight | Aluminum3.5 Kg |
| Actuator | Pneumatic Diaphragm Actuator (standard) |
|---|---|
| Conditions | New |
| Application | Ethylene, Air Separation, LNG Liquefaction |
| Power | Pneumatic |
| Applicable Medium | Water, Oil, Liquefied Gas, Etc. |
| Accessories | Solenoid Valve |
|---|---|
| Power | 0.2-2.2KW |
| Body Design | Short Pattern |
| Control Range | 0-100% |
| Temperature Of Media | Low Temperature |
| Control Signal | 4-20mA Two-wire System |
|---|---|
| Mounting Standard | IEC 60534-6 (NAMUR) |
| Supply Air Pressure | 1.4-7 Bar (20-105 Psi) |
| Communication Protocol | HART (3730-3) |
| Protection Rating | IP66/IP67, ATEX/IECEx |
| Temperature Range | -40 ... +85 °C / -40 ... +185 °F, Standard Version |
|---|---|
| Communication | HART, FOUNDATION Fieldbus, Profibus PA |
| Protection Class | IP66 / NEMA 4X Enclosure |
| Temperature Range (arctic Version) | -53 ... +85 °C / -63 +185 °F |
| Control Signal | 4-20 MA Loop-powered, Reverse Polarity Protected |
| Relative Humidity | 10 To 90% Non-condensing |
|---|---|
| Supply Pressure Effect | 0.05% Per Psi |
| Insulation Resistance | Greater Than 10 G Ohms At 50% RH |
| Operating Temperature Limits | -58°F To 185°F (-50°C To 85°C) |
| Storage Temperature Limits | -58°F To 200°F (-50°C To 93°C) |
| Air/Electric Wiring Connection | Rc. 1/4 / G1/2 |
|---|---|
| Input Signal / Characteriatic | 4 To 20, 4 To 12, 12 To 20 MA DC / Linear |
| Max. Capacity | Output Atomosphere,175 Nl/min. At Sup. 140 KPa [gaug] |
| Environment Temp. | Standard Model: -20 To +80°, Low Temp.model: -50 To +60° |
| Air Supply | 140 To 700 KPa |
| Range Of Product | Valve Positioners |
|---|---|
| Pneumatic Connection Type | 0.25 Inch 18 NPT G 1/4 |
| Maximum Hysteresis | 0.3 % |
| Linearity | < 0.4 % Of The Travel Span |
| IP Degree Of Protection | IP66 |
| Input Signal | 4~20mA DC |
|---|---|
| Required Air Quality | Class 3 (ISO8573-1) |
| Certifications & Hazardous Area Rating | CE Certified, EX Ia IIC T5/T6 Intrinsically Safe |
| Conduit | G(PF)1/2, NPT1/2, M20 |
| Enclosure | IP66 (EN60529) |
| Area Classification | Explosion Proof, Intrinsically Safe, Non-incendive, Dust |
|---|---|
| Operating Temperature | Standard Temperature, High Temperature |
| Mounting Type | Actuator Mounted |
| Supply Media | Air |
| Process Control | Flow, Pressure, Temperature, Level |