| Flow Characteristics | Modified Equal Percentage, Linear |
|---|---|
| Operating Temperature | Low Temperature (-40F), High Temperature (250F) |
| Process Connection Type | Flanged |
| Critical Service | Cavitation, Noise Abatement |
| Shutoff Class | Class IV (FCI 70-2), Class VI (FCI 70-2) |
| Certifications | CRN, CUTR, Fugitive Emission, PED, SIL Capable |
|---|---|
| Critical Service | Noise Abatement, Cavitation, Erosive, Low Flow, Corrosive, General Service |
| Flow Characteristics | Equal Percentage, Linear, Special Characterization |
| Material | Carbon Steel, Stainless, Duplex, Alloy |
| Operating Temperature | Standard Temperature, High Temperature |
| Maximum Voltage | 30.0 VDC |
|---|---|
| Compliance Voltage | 10.0 VDC @ 20 MA |
| Repeatability | <0.05% Full Scale |
| Model Number | Logix 3200MD Digital HART Positioner |
| Communications | HART Protocol |
| Nominal Diameter | DN100 To DN900 (4 Inch To 36 Inch) |
|---|---|
| Nominal Pressure | PN10 16 25 40 Class 150 300 |
| Connection Type | Wafer And Flange Type |
| Seal Face Type | RF MFM BW |
| Flange Standard | JB T79.1-94 JB T79.2-94 ASME B16.5 HG20592 HG20615 |
| Attachment | Pipe Or Wall Mounting |
|---|---|
| Mounting Position | Upright, Condensate Drainage Downwards |
| Ambient Temperature | -40 … +60°C |
| Material | Steel |
| Weight, Approx. | 1.8 Kg |
| Communication Protocol | 4-20 MA HART |
|---|---|
| Output Signal | Pneumatic Pressure Up To 145 Psig (10 Bar) |
| Protection Rating | IP66/IP67 (dust-tight And Water-resistant) |
| Power Supply | 24V DC (9.5V Minimum For Analog Control, 10V For HART) |
| Accuracy | ±0.50% Of Output Span (independent Linearity) |
| Supply Pressure | Min 1.5 Bar; Max 7 Bar (101 Psig) |
|---|---|
| Enclosure Rating | IP66 |
| Air Consumption | 0.06-0.12 Nm³/h |
| Operating Temp | -40°C To 80°C (-40°F To 176°F) |
| Power Supply | 8.5-30 VDC |
| Weight | 8.3 Pounds (3.9 Kg) Aluminum 20.5 Pounds (9.3 Kg) Stainless Steel |
|---|---|
| Housing Material | Cast, Powder-painted Aluminum, Stainless Steel |
| Power Supply | Two-wire, 4-20 MA 10.0 To 30.0 VDC |
| Model Number | Logix 3200MD Digital HART Positioner |
| Compliance Voltage | 10.0 VDC @ 20 MA |
| Maximum Voltage | 30.0 VDC |
|---|---|
| Compliance Voltage | 10.0 VDC @ 20 MA |
| Repeatability | <0.05% Full Scale |
| Model Number | Logix 3200MD Digital HART Positioner |
| Communications | HART Protocol |
| Attachment | Pipe Or Wall Mounting |
|---|---|
| Mounting Position | Upright, Condensate Drainage Downwards |
| Ambient Temperature | -40 … +60°C |
| Material | Steel |
| Weight, Approx. | 1.8 Kg |