| Ambient Temperature | -20 ~ +70℃ |
|---|---|
| Pneumatic Connections | Rc 1/4 Or NPT 1/4 |
| Air Supply | Max. 7.0bar (100psi) |
| Repeatability | Within ± 0.5% F.S |
| Packaging Details | Cardboard box + protection |
| Ambient Temperature | -40°C To +80°C (-40°F To +176°F) |
|---|---|
| Hysteresis | < 0.1% |
| Output Pressure | 0 - 100% Of Supply Pressure |
| Air Consumption | Typically < 0.1 Nm³/h (at Steady State) |
| Hazardous Area Certification | ATEX, IECEx, FM |
| Output Modules | P/P (3-15 Psi) Or I/P (4-20 MA; Optional 10-50 MA) |
|---|---|
| Supply Pressure Tolerance | Up To 150 Psi Without External Regulator |
| Shock & Vibration Handling | Up To 2 G And 500 Hz Vibration Frequency Support |
| Signal Split Range | 2-, 3-, Or 4-way Split Range |
| Air Consumption | ~0.25 SCFM (steady State) / Up To 0.31 SCFM (I/P Module) |
| Class Of Protection | IP65 |
|---|---|
| Temperature Range | -40 ... + 50°C /-40 ... + 65°C |
| Input | 4-20mA |
| Condition | New |
| Packaging Details | As required |
| Set Point | 4 To 20 MA |
|---|---|
| Valve Travel | 3.6 To 300 Mm |
| Opening Angle | 24 To 100° |
| Material | Aluminum |
| Communication | HART® Field Communication Protocol |
| Mounting Type | Actuator Mounted |
|---|---|
| Operating Temperature | Standard Temperature, High Temperature |
| Position Control | Modulating |
| Area Classification | ATEX Group II Category 2 Gas And Dust |
| Communication | Protocol3-15 Or 6-30 Psi, 0.2 -1.0 Or 0.4 -2.0 Bar Pneumatic Signal |
| Supply Power | 4 To 20mA, Loop Powered |
|---|---|
| Electrical Connections | PF 1/2,NPT 1/2,M20x1.5 |
| Output Range | 0-7 Bar (0- 100 Psi) |
| Supply Pressure | 1.4 To 7 Bar (20 To 100 Psi) |
| Pneumatic Connections | PT 1/4,NPT 1/4 |
| Input Signal | 4~20mA DC |
|---|---|
| Air Supply Interface | P(NPT) 1/4 |
| Protection Rating | IP66 |
| Air Consumption | Less Than 2.5 LPM (Supply Pressure = 0.14 MPa) |
| Input Pressure Range | 0.14-0.7 MPa |
| Opening Angle | 24 To 100° |
|---|---|
| Air Supply | 1.4-8 Bar (20-115 Psi) |
| Mounting Position | Upright, Condensate Drainage Downwards |
| Optional Solenoid Valve | With |
| Electrical Connections | 1/2 NPT Internal Thread |
| Communication Protocol | 4-20 MA HART |
|---|---|
| Diagnostics | Yes |
| Max Outlet Pressure | 145 Psig |
| Operating Temperature | Standard Temperature, High Temperature |
| Packaging Details | Cardboard box + protection |