| Accuracy | ±1%,±1.6% |
|---|---|
| Ambient Temperature | -20°C To +60°C |
| Diameter Nominal | 2.5"(63mm), 4"(100mm),6"(150mm) |
| Input Signal | 4-20 MA HART |
| Material | Aluminum |
| Actuator | Pneumatic Diaphragm Actuator (standard) |
|---|---|
| Conditions | New |
| Application | Ethylene, Air Separation, LNG Liquefaction |
| Power | Pneumatic |
| Applicable Medium | Water, Oil, Liquefied Gas, Etc. |
| Air Consumption | 0.082 Nm³/h @ 4.1 Bar(0.048 SCFM @ 60 Psi) |
|---|---|
| Sensitivity | ≤ 0.25 % |
| Communications | HART 6 And 7 |
| Output Air Capacity | 20.8 Nm³/h @ 4.1 Bar(12.2 SCFM @ 60 Psi) |
| Customized Support | OEM |
| Output Pressure | 3-15 Psi (0.2-1.0 Bar) |
|---|---|
| Temperature Range | -40 °C To +82 °C |
| Enclosure Rating | Ip66 |
| Supply Pressure | 30-150 Psi (2.1-10.3 Bar) |
| Input Signal | 4-20 MA DC |
| Operating Temperature | -55 °C To +85 °C (-67 °F To +185 °F) |
|---|---|
| Communications Protocol | Analog, HART, Foundation Fieldbus, Discrete I/O |
| Air Consumption | 0.3 SCFM (standard); 0.075 SCFM (low-bleed) @ 60 Psi |
| Output Capacity | 18 SCFM @ 60 Psi (standard/low-bleed Relay) |
| Diagnostics | Yes |
| Conditions | New |
|---|---|
| Sensitivity | ≤ 0.25 % |
| Communications | HART 6 And 7 |
| Output Air Capacity | 20.8 Nm³/h @ 4.1 Bar(12.2 SCFM @ 60 Psi) |
| Air Consumption | 0.082 Nm³/h @ 4.1 Bar(0.048 SCFM @ 60 Psi) |
| Minimum Required Operating Current | 3.6 MA |
|---|---|
| Input Pressure Range | 1.5 To 6.0 Bar |
| Repeatability | < 0.25% |
| Weight Of Valve Positioner | 3.5 Kg |
| Communication | HART 5, 6 And 7 |
| Input Signal Options | 4-20 MA (analog), HART, FOUNDATION Fieldbus |
|---|---|
| Air Supply Pressure | 3-7 Bar |
| Protection Rating | IP66 |
| Accuracy | ≤ 0.25 % |
| Temperature Range | -52 °C To +85 °C (-62 °F To +185 °F) |
| Input Signal | 4-20 MA DC |
|---|---|
| Linearity | ≤ ±0.75% Of Span |
| Housing Material | Aluminum Or Stainless Steel |
| Ambient Temperature | -40 °C To +80 °C |
| Repeatability | ≤ ±0.3% |
| Power Supply | Loop Powered From 4-20mA Control Signal |
|---|---|
| Load Voltage | 11.0 VDC At 20 MA DC / 10.0 VDC At 4 MA DC |
| Acting Type | Single Or Double |
| Supply Medium | Air Or Nitrogen |
| Digital Communicatin | HART 7 |