| Material | Stainless Steel |
|---|---|
| Measuring Principle | Guided Radar |
| Process Pressure/max. Overpressure Limit | Vacuum...400 Bar (Vacuum...5800 Psi) |
| Communication | 4...20 MA HART PROFIBUS PA FOUNDATION Fieldbus |
| Ambient Temperature | -50...+80 °C (-58...+176 °F) |
| Application | Level/Interface |
|---|---|
| Installation | Chamber |
| Process Temperature | -196 To +450 °C (-320 To +850 °F) |
| Materials-Cable | 316 (1.4401) |
| Max. Process Pressure | 431 Bar @ +20 °C (6250 Psi @ +70 °F |
| Sensitivity | Up To 150:1 |
|---|---|
| Weight | Depends On Specific Instrument |
| Wetted Material | Stainless Steel; 316 / 316L And CF3M |
| Wireless Update Rate | 1 Sec. To 60 Min., User Selectable |
| Measuring Range | Up To 2000 Psi (137,89 Bar) Differential |
| Pressure Range | Up To 40 Bar |
|---|---|
| Control Signal | 4-20mA/0-10V |
| Conditional | New |
| Connection Type | Flange, Thread |
| Protocol Support | HART, FOUNDATION Fieldbus, PROFIBUS PA |
| Pressure Range | Up To 40 Bar |
|---|---|
| Control Signal | 4-20mA/0-10V |
| Conditional | New |
| Connection Type | Flange, Thread |
| Protocol Support | HART, FOUNDATION Fieldbus, PROFIBUS PA |
| Power Supply | (100~240)VAC, 50/60Hz / (18~28)VDC |
|---|---|
| Accuracy | ±0.3%FS / ±0.5%FS |
| Ambient Temperature | Main Unit: (-20~60)℃, Probe: (-20~80)℃ |
| Storage Temperature | (-20~80)℃ |
| Protection Rating | Main Unit: IP65, Probe: IP68 |
| Accuracy | ± 2 Mm |
|---|---|
| Power Supply | 12-35 VDC (30 VDC In Intrinsically Safe Installations) |
| Measurement Frequency | 80 GHz |
| Antenna Type | Process Seal, Lens Antenna, ATAP Lens Antenna |
| Operating Temperature | -76 To 392 °F (-60 To 200 °C) |
| Operating Temperature | -76 To 392 °F (-60 To 200 °C) |
|---|---|
| Communication Protocol | 4-20mA HART7,WirelessHAR |
| Material | Brass, Aluminum Alloy |
| Accuracy | ± 2 Mm |
| Power Supply | 12-35 VDC (30 VDC In Intrinsically Safe Installations) |
| Accuracy | ± 2 Mm |
|---|---|
| Power Supply | 12-35 VDC (30 VDC In Intrinsically Safe Installations) |
| Measurement Frequency | 80 GHz |
| Antenna Type | Process Seal, Lens Antenna, ATAP Lens Antenna |
| Operating Temperature | -76 To 392 °F (-60 To 200 °C) |
| Accuracy | ± 2 Mm |
|---|---|
| Power Supply | 12-35 VDC (30 VDC In Intrinsically Safe Installations) |
| Measurement Frequency | 80 GHz |
| Antenna Type | Process Seal, Lens Antenna, ATAP Lens Antenna |
| Operating Temperature | -76 To 392 °F (-60 To 200 °C) |